♦ Strong products ♦ Good advice ♦ Delivered within 1-3 working days* ♦ BERG FENDT GO-KART ACTION

Advantages

chemically resistant

mechanically stressed

prevents concrete rot

emission-free

Free site visit

Are you interested in applying a feed alley coating, but still have questions? We would be happy to come by and personally advise you on which coating system is most suitable and how to apply it. Request a no-obligation site visit now.

reference 

Feed alley coating Vriezeveen

In Vriezeveen, Farmcoat was recently applied to a new feed alley. After an on-site visit by our technical advisor, we were able to provide an appropriate recommendation suitable for this surface. Because the feed alley was not yet worn in, we were able to recommend a thin chemically resistant and mechanically resistant coat. Because the substrate consisted of floated concrete, we recommended sanding the concrete layer first. Then the primer and gray coating was applied in 1 day. The farmer could easily handle all this himself. To maintain a tight finish, the feed alley was first neatly marked out with tape. 

How long does it take to apply a feed corridor coating?

Farmcoat is a two-layer floor coating consisting of a primer and a coating. 4 hours after applying the primer, the coating can be applied. So you can be finished coating within 1 day. However, keep in mind that you should already clean the feeding alley well the day before so that it can dry properly before you start coating. After applying the coating, it must dry/harden for 12 hours. So keep in mind that you cannot use the feed alley for at least a day and a half.  

What colors is the coating available in?

Our coatings are offered as standard transparent or in RAL 7001 (gray). On request and starting from a minimum total order of 50 kilos, you can choose any RAL or NCS color.

Does the coating contain anti-slip?

The coating provides a non-slip yet smooth finish. If you need an extra anti-slip, or even a very coarse anti-slip (walking surface of cattle) we can offer this on a custom basis.

How thick is the coating to apply?

The feed alley coating can be applied in very thick layers. Assume up to 2 kilos per square meter. For very worn substrates, it has a leveling effect.

Is it easy to apply yourself?

Farmcoat has been developed in such a way that it is still easy to apply by laymen/inexperienced people. With every order we supply as standard a detailed manual which clearly describes in steps how to apply the coating.

What accessories do I all need?

For anyone who will be coating, we recommend the following accessories:

  • 1x large bracket (25 cm)
  • 2x large rollers (25 cm)
  • 1x small bracket (10 cm)
  • 2x small roller (10 cm)
  • 2x brush
  • 1x mixing top
  • 1x mixing stick

 

Robert (29) - dairy farmer Terwolde (GLD)

"A sleek and hygienic floor to perform on"

Dennis - Horse stable - community of Hellendoorn

"Quick service and flexible"

Helmus - Poultry farm - Gem. Wells

"A beautiful work floor and easy to clean"